Components of solar photovoltaic laminated cloth

low price

Laminated fabric is a special high temperature solar laminator laminating cloth, glass fiber as a substrate, the suspension polyterafluoroethylene ( commonly known as plastic Wang ) emulsion as raw materials, glass fiber cloth impregnated with high performance and

Using the principle of laminated cloth:

In layer press solar photovoltaic components, the laminated cloth are respectively placed on the PV module the top and bottom, as the cloth and cloth. Using the laminated cloth anti-sticking, to prevent the EVA film and other material under high temperature in the laminating stick.

The main products classification:

1) inner pressure with high temperature cloth layer press

The backplane lamination material order is Teflon cloth + glass + EVA + cell + EVA + back panel + Teflon cloth, mainly the use of Teflon non-stick, prevent EVA glued layer press.

The use of specification: small press 1.25 meters wide, large layer press 1.8, 2, 2.2, 2.4 meters width has, unequal in length, is generally 6 meters.

Products of the company: T: 0.25mm, T: 0.30mm T: 0.35mm

2) the press within the conveyor belt with high temperature cloth

Automatic laminator battery board through a high temperature resistant and anti sticking conveyor belt conveyor, the laminator is vacuum, in order to make the cloth will not suck board, requirements of cloth surface lines, belt conveyor tension when not too big.

The use of specification: small press 1.25 meters wide, large layer press 1.8, 2, 2.2, 2.4 meters width has, unequal in length, is generally 6 meters.

Products of the company: T: 0.25mm, T: 0.30mm T: 0.35mm

Components of solar photovoltaic laminated cloth